The manufacturer warrants the following:
A. Density: The manufacturer's products are made with high density polyurethane
foam with an overall density similar to
White Pine at between 14 and 24 lb. per cubic foot. The manufacturing process
provides a greater skin density than core
density which increases durability.
B. Surface Properties and
Finishes: All products are produced incorporating a white or wood color barrier
coating. In addition to
this integral barrier coat, all products receive a primer coat with built-in UV
inhibitors. The combination of the integral shell-like
skin, the barrier coat and the primer top coat provides an excellent substrate
for durable finishes.
C. Ultra Violet: Ultra Violet rays do not effect properly
D. Compressive Strength: Falls within the 300 - 400 P.S.I.
E. Tensile Strength: Falls within the 300 - 400 P.S.I. range.
F. Flexural Strength: The
degree of flexibility in any given polyurethane product is determined by the
shape and size of its
cross-section. Due to the inherent flex characteristics of lineal footage
products, they will follow some curvature and uneven
To correct for this affix the product to a straight or flat substrata.
G. Moisture Resistance:
The polyurethane has a closed-cell structure which provides protection from most
solvents and renders it
almost completely moisture resistant.
H. Mildew Resistance: All
polyurethane products are mold and mildew resistant and cannot be harmed by
termites or other
I. Flammability: All
polyurethane products are combustible when exposed to open flame, as are all
does offer a Fire Resistant option with a flame spread index of 30 and a smoke
index of 200 - 300.
J. Shrinkage: All
polyurethane materials will expand and contract nominally depending on
environmental factors such as
temperature and humidity. Following the manufacturer's installation instructions
and recommended Adhesive are provided to
address shrinkage and must be used in order not to void warranty.
K. Applied finishing
materials by others. Do not use solvent based adhesives or paints due to
the chemical reaction between
and the solvents that will dissolve the material.
L. Warranty: The
manufacturer warrants to the original purchaser, it's rigid polyurethane
material will be free from defects in
material and workmanship for as long as the original purchaser resides in the
home that the product was installed when the
polyurethane is installed, finish painted and used under recommended
conditions and instructions. To the original purchaser,
for a period of one year from the date of purchase, it's white exterior primer
paint applied to the polyurethane will be free from
blistering and pealing when used installed and finished painted under
recommended conditions and instructions. The original
purchaser and their installers must inspect every piece prior to
installation. Both parties must waive all defects which could
have been discovered by reasonable inspection prior to installation.
Warranty will automatically be void if a non-approved
adhesive or solvent based paints or stains are used. Failure to follow the
manufacturer's storage and handling instruction will
void this limited warranty. In the event that the claim is made under this
warranty and conditions had been met, the original
purchaser must notify the manufacturer within writing within 30 days of making
Manufacturer reserves the right to inspect the defective product on site, or
request that the
original purchase at their expense return the defective product to the
manufacturer for inspection. The manufacturer will
determine if the product failed, and whether or not it will repair, replace, or
refund said defective parts. The manufacturer
shall have no liability to any person, firm, or corporation whatsoever for
incidental or consequential damage such as, but not
limited to, labor, finishing, parts damaged in transit, freight charges,
installation, lost profits, lost sales, acts of nature, civil unrest,
or acts of terrorism. No purchaser may take any deduction or credit
against any amount owed to the distributor Imperial
Productions & Distribution Inc., or make any chargeback with regards to a
warranty claim, without the expressed written consent
of the distributor. This limited warranty is exclusive, and made in lieu of all
other express warranties, whether written, oral, or
implied (including any warranty or merchant ability or fitness of purpose), and
extends only to the original purchaser's purchase.
All sales are conducted and executed in Toronto Ontario Canada. Some
states and provinces may not allow limitations on how
long an implied warranty lasts, or the exclusion and limitations of incidental
or consequential damages, so the above limitations
or exclusions do apply to you as all sales are conducted in Toronto Canada and
subject to Ontario Law.